PEP Modular Computers Modular Computers RS485 User Manual page 260

SMART I/O User's Manual
O_ENABLE_LINE_CHECK:
<analog var> := OPERATE(<iovar>, O_ENABLE_LINE_CHECK,
where <analog var> represents the analog return variable and can
<iovar>
<var>
O_DISABLE_LINE_CHECK:
<analog var> := OPERATE(<iovar>, O_DISABLE_LINE_CHECK,
where <analog var> represents the analog return variable and can
<iovar>
<var>
Page 5 - 104
This operate call allows the user to enable open-
loop checking on the current version of the SM-
ADC1. The syntax is as follows:
<var>);
be zero if the operate call is supported and the
correct <iovar> is passed or non-zero if an
error occurred.
is the variable name for the channel where the
operate call is to take effect.
is not used.
This operate call allows the user to disable open-
loop checking on the current version of the SM-
ADC1. The syntax is as follows:
<var>);
be zero if the operate call is supported and the
correct <iovar> is passed or non-zero if an
error occurred.
is the variable name for the channel where the
operate call is to take effect.
is not used.
©1996 PEP Modular Computers GmbH
Chapter 5 Analog Modules
October 01, 1996