AMX TPI-PRO-2 Operation/Reference Manual page 74

TPI-PRO/DVI Configuration Pages
Video Parameters (Cont.)
• Contrast:
• Saturation:
• Hue:
• Phase:
• H Position
• H Size:
• V Position:
• Red/Pr:
• Green/Y:
• Blue/Pb:
68
Use the UP/DN buttons to adjust the contrast level of the incoming signal.
• This option does not appear if you select Computer (VGA), Component (YPrPb), or DVI as
the input type.
• Range = 0 - 255
• Default = 128
Use the UP/DN buttons to adjust the color saturation level of the incoming signal.
• This option does not appear if you select Computer (VGA), Component (YPrPb), or DVI as
the input type.
• Range = 0 - 255
• Default = 128
Use the UP/DN buttons to adjust the hue level of the incoming signal.
• This option does not appear if you select Computer (VGA), Component (YPrPb), or DVI as
the input type.
• Range = 0 - 255
• Default = 128
Use the UP/DN buttons to adjust the phase (RGB tracking/signal) level of the incoming signal.
• This option only appears if you select Computer (VGA) or Component (YPrPb) as the input
type.
• Range = 0 - 255
• Default = 0
Note: Adjustments to the Phase value can resolve most image issues.
Use the UP/DN buttons to alter the horizontal position of the incoming signal.
• This option only appears if you select Computer (VGA) or Component (YPrPb) as the input
type.
• Range = 0 - 255
• Default = 128
Use the UP/DN buttons to alter the horizontal size of the incoming signal.
• This option only appears if you select Computer (VGA) or Component (YPrPb) as the input
type.
• Range = 0 - 255
• Default = 128
Use the UP/DN buttons to alter the vertical position of the incoming signal.
• This option only appears if you select Computer (VGA) or Component (YPrPb) as the input
type.
• Range = 0 - 255
• Default = 128
Use the UP/DN buttons in this tab to adjust the Red/Pr Gain and Offset settings.
• This option only appears if you have selected RGB or Component (YPrPb) as the input type.
• Range = 0 - 255
• Default = 128
Use the UP/DN buttons in this tab to adjust the Green/Y Gain and Offset settings.
• This option only appears if you have selected RGB or Component (YPrPb) as the input type.
• Range = 0 - 255
• Default = 128
Use the UP/DN buttons in this tab to adjust the Blue/Pb Gain and Offset settings.
• This option only appears if you have selected RGB or Component (YPrPb) as the input type.
• Range = 0 - 255
• Default = 128
TPI-PRO/DVI (Total Presentation Interface)