Moving Text - AMX TPI-PRO-2 Operation/Reference Manual

Moving Text

To move the text annotation object once it is displayed on the screen:
1.
Select the Select Object tool from the main TakeNote Menu Bar (see the Using the Select Object
Tool section on page 182).
2.
Select the text, and drag it to the desired location on the screen.
Pen Options Menu Bar
Click the Pen button in the TakeNote Menu Bar (see FIG. 100 on page 180) to access the Pen Options Menu
Bar FIG. 117:
Click and drag to set the
FIG. 117 Pen Options Menu Bar
Note that the settings made in the Pen Options Menu Bar can affect all types of annotations:


All Pen settings must be set before drawing the line, shape or entering the text - once
the annotation object is drawn, these settings cannot be changed.
TPI-PRO/DVI (Total Presentation Interface)
Draw a solid line
Draw a dotted line
Draw a dashed line
line width (1-50)
Color selections
The Line attributes (Type, Width, Color and Opacity) affect all types of lines, curves and shapes. For
example, if you have selected Dotted as the line Type, Yellow as the line Color, "10" as the line
Width, and Opacity set to "50", then all lines (including the lines used to draw shapes) will be
yellow dotted lines with a width of 10 and opacity of 50, until these attributes are changed.
The Color and Opacity settings also apply to Text annotations.
Using Takenote™
Current color selection is
indicated here
Color selections
Click and drag to set the line opacity
(1 = nearly transparent, 100 = totally opaque)
Close the Pen menu bar
(return to the main TakeNote Menu Bar)
189