Upgrade The Tpi-Pro/Dvi Firmware - AMX TPI-PRO-2 Operation/Reference Manual

Upgrading Firmware
3.
Click Done to accept the new value and return to the System Settings page.
Do not alter the Master Port Number value (1319). This default value is used by
NetLinx.
4.
Reboot the TPI-PRO/DVI (see the Rebooting the TPI-PRO/DVI section on page 54).

Upgrade the TPI-PRO/DVI Firmware

Check www.amx.com for the latest firmware (*.KIT file) for the TPI-PRO/DVI. Firmware updates are
available for registered AMX Dealers to download from the Tech Center section of the website.
1.
Use the OnLine Tree in NetLinx Studio to view the devices on the System. Verify the TPI-PRO/DVI
appears in the OnLine Tree tab of the Workspace window (FIG. 91).
FIG. 91 NetLinx Workspace window (showing connected TPI-PRO/DVI)



2.
Download the appropriate firmware (*.KIT) file to your PC.
3.
In NetLinx Studio select Tools > Firmware Transfers > Send to NetLinx Device to open the Send to
NetLinx Device dialog (FIG. 92).
172
NetLinx Master - firmware version
and device number
NetLinx Studio -
version number
Click on the Display button to open the Online Tree context menu, and select Refresh System to
refresh the device tree.
The default System value is 1.
The default TPI-PRO/DVI device number is 10001.
TPI-PRO/DVI - firmware version
and device number
TPI-PRO/DVI (Total Presentation Interface)