Using The Save Tool - AMX TPI-PRO-2 Operation/Reference Manual

Using Takenote™
To change the color of the pointer, select a color from the Pen Option Menu Bar (see the Pen Options Menu
Bar section on page 189).

Using the Save Tool

The Save tool (FIG. 106) allows you to capture and save screen images from the TakeNote session.
FIG. 106 Save Tool
Capturing and Saving the Screen Image
Press the Save button to capture the current screen image, including all visible annotations, and save the
captured image to either a USB stick or to the TPI-PRO/DVI's internal disk drive.
By default, the TPI-PRO/DVI is configured to save captured TakeNote screen images to a USB stick inserted
into any of the USB (Type A) Input ports.
To save captured TakeNote screen images to a USB stick:
1.
Insert a USB stick into any of the USB (Type A) Input ports on the TPI-PRO/DVI. (see the Wiring and
Device Connections section on page 15).
The TPI-PRO/DVI automatically detects the first USB stick to be inserted into any of the USB (Type A)
Input ports (two available on the front panel, two more available on the rear panel - refer to FIG. 4 and
FIG. 5 on page 15).
2.
Press the Save button on the Main TakeNote Menu Bar. This action will cause the screen to refresh.
3.
Once the screen has refreshed, the captured screen image has been saved to the USB Stick.


Changing the Storage Location For Captured TakeNote Screen Images
The screen image will be saved according to the settings specified in the TakeNote Control (Protected Setup)
page:
1.
Open the TakeNote Control page (FIG. 98):
FIG. 107 TakeNote Control page
184
Images are saved as JPG files.
Images are named according to the TakeNote session name, followed by a timestamp of the time
and date the image was saved.
Press to cycle through the
Storage Location options:
USB Priority (default)
Local Disk
disabled
TPI-PRO/DVI (Total Presentation Interface)