AMX TPI-PRO-2 Operation/Reference Manual page 18

TPI-PRO (Total Presentation Interface)
TPI-PRO Specifications (Cont.)
• Serial Touch
Drivers:
• USB Drivers:
• Button
Assignments:
• Communication/
Programming:
• Enclosure:
• Operating/
Storage
Environment:
• Dimensions (HWD):
• Weight:
• Certifications:
• Included
Accessories:
4
Go to http://www.amx.com//techdocs/TPI-PRO.Supported.Touch.Monitors.xls
view/download the most recent List of Touch Monitors and USB Touch Drivers
Tested with the TPI-PRO/DVI (including the most current listing of tested serial
touch panel drivers).
USB Touch drivers are automatically loaded when the USB Touch Monitor is
detected.
Note: Go to http://www.amx.com//techdocs/TPI-PRO.Supported.Touch.Moni-
tors.xls to view/download the most recent List of Touch Monitors and USB / Serial
Touch Drivers Tested with the TPI-PRO (including the most current listing of tested
USB touch panel drivers).
Button assignments can be modified in TPD4 (not on the TPI-PRO.)
• Button channel range: 1 - 4000 button push and feedback (per address port)
• Button variable text range: 1 - 4000 (per address port)
• Button states range: 1 - 256 (General Button; 1 = Off State, 2 = On State)
• Level range: 1 - 600 (Default level value 0-255, can be set up to 1-65535)
• Address port range: 1 - 100
Master communication and programming is available via an Ethernet connection.
Refer to the Configuring the Ethernet Connection on the NetLinx Master section on
page 47 for more information.
There are several methods of TPI-PRO communication and programming available:
• DHCP - Refer to the Configuring a DHCP Address section on page 44 for more
information.
• Static IP - Refer to the Configuring a Static IP Address section on page 45.
• URL - Refer to the NetLinx Master IP Address - URL Mode section on page 47.
• Listen - Refer to the NetLinx Master IP Address - Listen Mode section on page 49.
• Auto - Refer to the NetLinx Master Ethernet IP Address - Auto Mode section on
page 50.
• NPD (UPD) - Refer to the NetLinx Master Ethernet IP Address - NDP (UDP)
Mode section on page 50.
• URL (UPD) - Refer to the NetLinx Master Ethernet IP Address - URL (UDP)
Mode section on page 53.
Metal with black matte finish
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 5% to 85% RH Non-Condensing
• Storage Temperature: -10° C (14° F) to 70° C (158° F)
• Storage Humidity: 0% to 85% RH Non-Condensing
1.72" x 17.00" x 10.54" (4.37 cm x 43.18 cm x 26.77 cm)
8.25 lbs (3.74 kg)
• RoHS
• FCC (Class B)
• CE
• IEC/EN60950
• 2-pin PWR connector (41-5025)
• Assembly Kit (Four-#10-32 screws and Four-#10 washers) (KA0001)
• Rack Ear brackets for shelf, wall, and under-table mounting (60-0900-03)
• NXA-USBTN, TakeNote USB Computer Control Stick (FG070-603)
TPI-PRO (Total Presentation Interface)
to