AMX TPI-PRO-2 Operation/Reference Manual page 78

Protected Setup Page
Protected Setup Page (Cont.)
Protected Setup
Page Navigation
Buttons (Cont.):
Device ID:
Options:
72
• Other Settings - Press to open a slide bar with the following options:
Cache - press to access the Cache page, where you can adjust your Flash Cache
settings. Refer to the Protected Setup (Other Settings) - Cache Page section on page 79.
Passwords - press to access the Password Setup page, where you can specify up to
five security passwords. Refer to the Protected Setup (Other Settings) - Password
Settings Page section on page 81.
Note: The default password is 1988.
• Tools - Press to open a slide bar with the following options:
Panel Logs - press to access the Panel Logs page, where you can view your panel's
connection history. Refer to the Protected Setup (Tools) - Panel Connection Logs
Page section on page 82.
Panel Statistics - press to access the Panel Statistics page, where you can view the
connection statistics for your panel. Refer to the Protected Setup (Tools) - Panel
Statistics Page section on page 83.
Connection Utility - press to open the Connection Utility page, where you can view
connection statistics and information for your panel. Refer to the Protected Setup (Tools)
- Connection Utility Page section on page 84 for details.
• TakeNote - Press to access the TakeNote Control page, where you can enable or
disable the TakeNote Annotation Application. Refer to the Using Takenote™ section on
page 179 for details.
• Number - Opens a keypad that is used to set and display the current device number.
• Name - Opens an on-screen keyboard used to set and display the current device name.
Note that this device name is displayed in the G4 Web Control page as the Web Control
Name (see the Using G4 Web Control® section on page 175).
Allows you to view/edit the following TPI-PRO/DVI features:
• Function Show - press to display button function information on each button on the
panel pages:
The Channel port and code assignments are displayed in the top left corner.
The Level port and code assignments are displayed in the bottom left corner.
The Address port and code assignments are displayed in the bottom right corner.
Channel Code
Channel Port
3,132
Button
2,8 3,50
Level Port
Level Code
• Page Tracking - press to toggle page tracking on the TPI-PRO/DVI. When enabled, the
TPI-PRO/DVI sends page data to the NetLinx Master, or vice versa depending on the
touch panel settings.
• Telnet - press to enable or disable direct telnet communication to the TPI-PRO/DVI.
By default, Telnet is Enabled.
Channel Code
Channel Port
7,10
Slider
4,9
Address Port
Address Code
Level Port
Level Code
TPI-PRO/DVI (Total Presentation Interface)
1,8
Address Port
Address Code