AMX TPI-PRO-2 Operation/Reference Manual page 179

FIG. 92 Send to NetLinx Device dialog box (showing TPI-PRO/DVI firmware update via IP)
a.
Click the Browse (...) button to locate and selected the directory to which the KIT file was
downloaded, via the Browse For Folders dialog.
b.
Select the TPI-PRO/DVI's .KIT file from the Files list
c.
Enter the Device and System numbers for the target TPI-PRO/DVI. These values must match the
values listed in the Online Tree.
d.
Click Reboot Device to force the TPI-PRO/DVI to reboot after the firmware update process is
complete.
A reboot can take up 30 seconds after the firmware process has finished.
e.
Click Send. The file transfer progress is indicated in the Progress area of this dialog.
4.
Click Close after the TPI-PRO/DVI reboots.
TPI-PRO/DVI (Total Presentation Interface)
Click to locate the folder containing
the KIT file(s) that you want to transfer
Device number and System number
must match the values
listed in the Workspace window.
Upgrading Firmware
173