Prepare The Tpi-Pro/Dvi For Ethernet Communication - AMX TPI-PRO-2 Operation/Reference Manual

Prepare the TPI-PRO/DVI for Ethernet Communication

1.
Open the System Settings page on the TPI-PRO/DVI:
a.
Press the SETUP pushbutton on the front panel to access the Setup page.
b.
Press the Protected Setup button to access the Protected Setup page, using the on-screen keypad to
enter the password (default = 1988).
c.
Press the System Settings button to open the System Settings page (FIG. 89).
FIG. 89 System Settings page
2.
Press the Master IP/URL button to open the on-screen keyboard, and enter the Master's IP address or
URL. This information can be obtained from the Networking Addresses dialog in NetLinx Studio:
a.
In NetLinx Studio, select Diagnostics > Network Addresses to open the Network Addresses dialog
(FIG. 90).
FIG. 90 NetLinx Studio - Network Addresses dialog
b.
Click Get IP Information to retrieve IP information from the NetLinx Master.
TPI-PRO/DVI (Total Presentation Interface)
Upgrading Firmware
Press to toggle connection
Master Connection Modes
171