AMX TPI-PRO-2 Operation/Reference Manual page 106

NetLinx Programming
Button Commands With Embedded Codes (Cont.)
Embedded Codes (Cont.):
'%JI<alignment of icon 0-9>'
'%CF<on fill color>'
'%CB<on border color>'
'%CT<on text color>'
'%SW<1 or 0>'
'%ST<style>'
'%SO<sound>'
'%EN<1 or 0>'
'%WW<1 or 0>'
'%GH<bargraph hi>'
'%GL<bargraph low>'
'%GN<bargraph slider name>'
'%GC<bargraph slider color>'
'%GI<bargraph invert>'
'%GU<bargraph ramp up>'
'%GD<bargraph ramp down>'
'%GG<bargraph drag increment>'
'%VI<1 or 0>'
'%OT<feedback type>'
'%SM'
'%SF<1 or 0>'
'%OP<0-255>'
'%OP#<00-FF>'
'%UN<Unicode text'
'%LN<0-240>'
'%EF<text effect name>'
'%EC<text effect color>'
100
Set icon alignment using telephone Keypad layout
• 1 = left, top
• 5 = center, middle 9 = right, bottom)
• 0 is absolute followed by '<left>,<top>' outside the border.
Set Fill Color.
Set Border Color.
Set Text Color.
Show/Hide button.
Button Style.
Set Button Sound
Enable/Disable button.
Word wrap on/off.
Bargraph upper limit.
Bargraph lower limit.
Bargraph slider name/Joystick cursor name.
Bargraph slider color/Joystick cursor color.
Bargraph invert (0,1,2,3-See ^GIV).
Bargraph ramp up time 1/10 sec.
Bargraph ramp down time 1/10 sec.
Bargraph drag increment relative bargraph (See ^GDI).
Set Video, Video ON = 1, OFF = 0.
Feedback Type:
• None
• Channel
• Invert
• On(Always On)
• Momentary
• Blink
Submit text for text area button.
Set focus for text area button.
Note: Do not assign a variable text address range to set
focus to multiple buttons. Only one variable text address can
be in focus at a time.
Button Opacity:
• 0=Invisible
• 255=Opaque
Button Opacity:
• 00=Invisible
• FF=Opaque
Set Unicode text (See ^UNI).
Set lines of video removed.
Set text effect.
Set text effect color.
TPI-PRO/DVI (Total Presentation Interface)