c.
Click Edit Settings to open the TCP/IP Settings dialog (FIG. 40):
FIG. 40
NetLinx Studio - TCP/IP Settings dialog
d.
Note the Master IP/URL, and Master Port Number for the connected NetLinx Master.
3.
Press the System Settings button (on the Protected Setup page - see FIG. 36) to open the System Settings
page (FIG. 41).
FIG. 41
System Settings page
4.
Set the Master Connection settings to match those of the target NetLinx Master.
5.
Press the Back button to return to the Protected Setup page.
6.
Reboot the TPI-PRO/DVI (see the Rebooting the TPI-PRO/DVI section on page 54).
TPI-PRO/DVI (Total Presentation Interface)
Configuring Communication Settings
43