GE T35 Instruction Manual page 74

4.2 FACEPLATE INTERFACE
b) HIERARCHY
The setting and actual value messages are arranged hierarchically. The header display pages are indicated by double
scroll bar characters (##), while sub-header pages are indicated by single scroll bar characters (#). The header display
pages represent the highest level of the hierarchy and the sub-header display pages fall below this level. The MESSAGE
and keys move within a group of headers, sub-headers, setting values, or actual values. Continually pressing the
MESSAGE key from a header display displays specific information for the header category. Conversely, continually
pressing the MESSAGE key from a setting value or actual value display returns to the header display.
HIGHEST LEVEL
## SETTINGS
## PRODUCT SETUP
## SETTINGS
## SYSTEM SETUP
4
c) EXAMPLE MENU NAVIGATION
## ACTUAL VALUES
## STATUS
"
## SETTINGS
## PRODUCT SETUP
"
## SETTINGS
## SYSTEM SETUP
"
# PASSWORD
# SECURITY
"
ACCESS LEVEL:
Restricted
"
# PASSWORD
# SECURITY
"
# DISPLAY
# PROPERTIES
"
FLASH MESSAGE
TIME: 1.0 s
"
DEFAULT MESSAGE
INTENSITY: 25%
4-8
LOWEST LEVEL (SETTING VALUE)
# PASSWORD
# SECURITY
Press the key until the header for the first Actual Values page appears. This
page contains system and relay status information. Repeatedly press the
MESSAGE keys to display the other actual value headers.
Press the key until the header for the first page of Settings appears. This page
contains settings to configure the relay.
Press the MESSAGE key to move to the next Settings page. This page contains
settings for System Setup. Repeatedly press the
the other setting headers and then back to the first Settings page header.
From the Settings page one header (Product Setup), press the MESSAGE
once to display the first sub-header (Password Security).
Press the MESSAGE key once more and this will display the first setting for Pass-
word Security. Pressing the MESSAGE
setting messages for this sub-header.
Press the MESSAGE key once to move back to the first sub-header message.
Pressing the MESSAGE
ated with the Product Setup header.
Press the MESSAGE key once more and this will display the first setting for Dis-
play Properties.
To view the remaining settings associated with the Display Properties subheader,
repeatedly press the MESSAGE
T35 Transformer Management Relay
ACCESS LEVEL:
Restricted
MESSAGE
key repeatedly will display the remaining
key will display the second setting sub-header associ-
key. The last message appears as shown.
4 HUMAN INTERFACES
keys to display
key
GE Multilin