Hardware; Description; Panel Cutout - GE T35 Instruction Manual

3 HARDWARE

3.1 DESCRIPTION

3 HARDWARE 3.1DESCRIPTION

3.1.1 PANEL CUTOUT

The relay is available as a 19-inch rack horizontal mount unit with a removable faceplate. The modular design allows the
relay to be easily upgraded or repaired by a qualified service person. The faceplate is hinged to allow easy access to the
removable modules, and is itself removable to allow mounting on doors with limited rear depth. There is also a removable
dust cover that fits over the faceplate, which must be removed when attempting to access the keypad or RS232 communi-
cations port.
The horizontal case dimensions are shown below, along with panel cutout details for panel mounting. When planning the
location of your panel cutout, ensure that provision is made for the faceplate to swing open without interference to or from
adjacent equipment.
The relay must be mounted such that the faceplate sits semi-flush with the panel or switchgear door, allowing the operator
access to the keypad and the RS232 communications port. The relay is secured to the panel with the use of four screws
3
supplied with the relay.
Figure 3–1: T35 HORIZONTAL MOUNTING AND DIMENSIONS
GE Multilin T35 Transformer Management Relay 3-1