GE T35 Instruction Manual page 28

2.1 INTRODUCTION
The order codes for replacement modules to be ordered separately are shown in the following table. When ordering a
replacement CPU module or Faceplate, please provide the serial number of your existing unit.
Table 2–4: ORDER CODES FOR REPLACEMENT MODULES
POWER SUPPLY
2
CPU
FACEPLATE
DIGITAL I/O
CT/VT DSP
UR INTER-RELAY
COMMUNICATIONS
TRANSDUCER I/O
2-4
- ** -
UR
| 1H | 125 / 250 V AC/DC
| 1L | 24 to 48 V (DC only)
| 9E | RS485 + RS485 (ModBus RTU, DNP 3.0)
| 9G | RS485 + 10BaseF (MMS/UCA2, ModBus TCP/IP, DNP 3.0)
| 9H | RS485 + Redundant 10BaseF (MMS/UCA2, ModBus TCP/IP, DNP 3.0)
| 3C | Horizontal Faceplate with Display & Keypad
| 4A | 4 Solid-State (No Monitoring) MOSFET Outputs
| 4B | 4 Solid-State (Voltage w/ opt Current) MOSFET Outputs
| 4C | 4 Solid-State (Current w/ opt Voltage) MOSFET Outputs
| 4L | 14 Form-A (No Monitoring) Latchable Outputs
| 67 | 8 Form-A (No Monitoring) Outputs
| 6A | 2 Form-A (Voltage w/ opt Current) & 2 Form-C Outputs, 8 Digital Inputs
| 6B | 2 Form-A (Voltage w/ opt Current) & 4 Form-C Outputs, 4 Digital Inputs
| 6C | 8 Form-C Outputs
| 6D | 16 Digital Inputs
| 6E | 4 Form-C Outputs, 8 Digital Inputs
| 6F | 8 Fast Form-C Outputs
| 6G | 4 Form-A (Voltage w/ opt Current) Outputs, 8 Digital Inputs
| 6H | 6 Form-A (Voltage w/ opt Current) Outputs, 4 Digital Inputs
| 6K | 4 Form-C & 4 Fast Form-C Outputs
| 6L | 2 Form-A (Current w/ opt Voltage) & 2 Form-C Outputs, 8 Digital Inputs
| 6M | 2 Form-A (Current w/ opt Voltage) & 4 Form-C Outputs, 4 Digital Inputs
| 6N | 4 Form-A (Current w/ opt Voltage) Outputs, 8 Digital Inputs
| 6P | 6 Form-A (Current w/ opt Voltage) Outputs, 4 Digital Inputs
| 6R | 2 Form-A (No Monitoring) & 2 Form-C Outputs, 8 Digital Inputs
| 6S | 2 Form-A (No Monitoring) & 4 Form-C Outputs, 4 Digital Inputs
| 6T | 4 Form-A (No Monitoring) Outputs, 8 Digital Inputs
| 6U | 6 Form-A (No Monitoring) Outputs, 4 Digital Inputs
| 8F | Standard 4CT/4VT
| 8G | Sensitive Ground 4CT/4VT
| 8H | Standard 8CT
| 8J | Sensitive Ground 8CT
| 7A | 820 nm, multi-mode, LED, 1 Channel
| 7B | 1300 nm, multi-mode, LED, 1 Channel
| 7C | 1300 nm, single-mode, ELED, 1 Channel
| 7D | 1300 nm, single-mode, LASER, 1 Channel
| 7E | Channel 1: G.703; Channel 2: 820 nm, multi-mode LED (L90 only)
| 7F | Channel 1: G.703; Channel 2: 1300 nm, multi-mode LED (L90 only)
| 7G | Channel 1: G.703; Channel 2: 1300 nm, single-mode ELED (L90 only)
| 7Q | Channel 1: G.703; Channel 2: 820 nm, single-mode LASER (L90 only)
| 7H | 820 nm, multi-mode, LED, 2 Channels
| 7I | 1300 nm, multi-mode, LED, 2 Channels
| 7J | 1300 nm, single-mode, ELED, 2 Channels
| 7K | 1300 nm, single-mode, LASER, 2 Channels
| 7L | Channel 1 - RS422; Channel 2 - 820 nm, multi-mode, LED
| 7M | Channel 1 - RS422; Channel 2 - 1300 nm, multi-mode, LED
| 7N | Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED
| 7P | Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, LASER
| 7R | G.703, 1 Channel
| 7S | G.703, 2 Channels
| 7T | RS422, 1 Channel
| 7W | RS422, 2 Channels
| 72 | 1550 nm, single-mode, LASER, 1 Channel
| 73 | 1550 nm, single-mode, LASER, 2 Channel
| 74 | Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, LASER
| 75 | Channel 1 - G.703, Channel 2 - 1550 nm, single -mode, LASER (L90 only)
| 76 | IEEE C37.94, 820 nm, multi-mode, LED, 1 Channel
| 77 | IEEE C37.94, 820 nm, multi-mode, LED, 2 Channels
| 5A | 4 dcmA Inputs, 4 dcmA Outputs (only one 5A module is allowed)
| 5C | 8 RTD Inputs
| 5D | 4 RTD Inputs, 4 dcmA Outputs (only one 5D module is allowed)
| 5E | 4 dcmA Inputs, 4 RTD Inputs
| 5F | 8 dcmA Inputs
T35 Transformer Management Relay
2 PRODUCT DESCRIPTION
GE Multilin