Direct Inputs - GE T35 Instruction Manual

Transformer management relay ur series
Hide thumbs Also See for T35:
Table of Contents

Advertisement

6.2 STATUS
PATH: ACTUAL VALUES

# DIRECT INPUTS

#
The
AVERAGE MSG RETURN TIME
configuration (this value is not applicable for non-ring configurations). This is a rolling average calculated for the last 10
messages. There are two return times for dual-channel communications modules.
The
UNRETURNED MSG COUNT
6
make the trip around the communications ring. The
Direct Output messages that have been received but fail the CRC check. High values for either of these counts may indi-
cate on a problem with wiring, the communication channel, or the relay(s). The
values can be cleared using the
COUNT
The
values represent the state of the x-th Direct Input.
DIRECT INPUT x
PATH: ACTUAL VALUES
# DIRECT DEVICES
# STATUS
These actual values represent the state of Direct Devices 1 through 8.
6-6
!
!"
STATUS
DIRECT INPUTS
AVG MSG RETURN
TIME CH1: 0 ms
UNRETURNED MSG
MESSAGE
COUNT CH1: 0
CRC FAIL COUNT
MESSAGE
CH1: 0
AVG MSG RETURN
MESSAGE
TIME CH2: 0 ms
UNRETURNED MSG
MESSAGE
COUNT CH2: 0
CRC FAIL COUNT
MESSAGE
CH2: 0
DIRECT INPUT 1:
MESSAGE
On
DIRECT INPUT 32:
MESSAGE
On
is the time taken for Direct Output messages to return to the sender in a Direct I/O ring
values (one per communications channel) count the Direct Output messages that do not
CLEAR DIRECT I/O COUNTERS
!
!"
STATUS
DIRECT DEVICES STATUS
DIRECT DEVICE 1
STATUS: Offline
DIRECT DEVICE 2
MESSAGE
STATUS: Offline
DIRECT DEVICE 8
MESSAGE
STATUS: Offline
T35 Transformer Management Relay
values (one per communications channel) count the
CRC FAIL COUNT
command.
6 ACTUAL VALUES
6.2.10 DIRECT INPUTS
and
UNRETURNED MSG COUNT
6.2.11 DIRECT DEVICES STATUS
CRC FAIL
GE Multilin

Advertisement

Table of Contents
loading

Table of Contents