Cooling Fan Unit (Q170Fan) (Q173Cpu/Q172Cpu Only) - Mitsubishi Q172CPU User Manual

Motion controller
Table of Contents

Advertisement

2 SYSTEM CONFIGURATION

2.4.11 Cooling fan unit (Q170FAN) (Q173CPU/Q172CPU only)

Number of the Motion CPU
1 module
2 modules or more
Item
Type
Ambient temperature
Operating voltage range [V]
Rated current [A]
Air capacity
Rated rotational speed [r/min]
Service life time
Application
Mass [kg]
This section explains the specifications of the Cooling fan unit (Q170FAN) used for the
Motion CPU module.
(1) Removable conditions of the Cooling fan unit
It is possible to remove the Cooling fan unit (Q170FAN) in order to disperse heat
from inside the Motion CPU module according to the number of Motion CPU
module and ambient temperature conditions.
Removable/Not removable of the Cooling fan unit (Q170FAN) by number of
Motion CPU module and ambient temperature is as follows.
(a) When using only one Motion CPU module
It is possible to remove the Cooling fan unit if the ambient temperature in
which the Motion CPU module will be operating is 0 to 40°C (32 to 104°F) .
(b) When using two or more Motion CPU module
Do not remove the Cooling fan unit( Q170FAN).
Ambient temperature
of the Motion CPU
(2) Cooling fan unit specifications
Model name
As a guideline for preventive maintenance, the module should be inspected
every six months and replaced approximately every two or three years even if the
accumulated number of operating hours is less than the service life time shown
above (Refer to section 6.3 Periodic Inspection.)
0 to 40°C
(32 to 104°F)
Removable
0 to 55°C ( 32 to 131 °F)
30000 hours rated voltage continuous operation (at 40°C (104°F) )
For cooling Motion CPU module
2 - 99
Over 40 to 55°C
(Over 104 to 131°F)
Not removable
Not removable
Q170FAN
Cooling fan
4.3 to 5.8
0.08
3
0.033 [m
/min]
7000
0.01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Q173cpuQ172cpunQ173cpun

Table of Contents