About Manuals - Mitsubishi Q172CPU User Manual

About Manuals

This manual is only to explain hardware of the Motion controller.
The following manuals are related to this product.
Referring to this list, please request the necessary manuals.
This User's Manual do not describes hardware specification and handling methods of the PLC CPU
modules, power supply modules, base unit and I/O module in details.
The above contents, refer to the QCPU User's Manual and Building Block I/O Module User's Manual.
Related Manuals
(1) Motion controller
Q173CPU(N)/Q172CPU(N) Motion controller (SV13/SV22) Programming Manual
(Motion SFC)
This manual explains the Multiple CPU system configuration, performance specifications, functions,
programming, error codes and others of the Motion SFC.
Q173CPU(N)/Q172CPU(N) Motion controller (SV13/SV22) Programming Manual
(REAL MODE)
This manual explains the servo parameters, positioning instructions, device list, error list and others.
Q173CPU(N)/Q172CPU(N) Motion controller (SV22) Programming Manual
(VIRTUAL MODE)
This manual describes the dedicated instructions use to the synchronous control by virtual main shaft,
mechanical system program create mechanical module.
This manual explains the servo parameters, positioning instructions, device list, error list and others.
Q173CPU(N)/Q172CPU(N) Motion controller (SV43) Programming Manual
This manual describes the dedicated instructions to execute the positioning control by Motion program of
EIA language (G-code).
This manual explains the Multiple CPU system configuration, performance specifications, functions,
programming, debugging, servo parameters, positioning instructions device list and error list and others.
Manual Name
A - 15
Manual Number
(Model Code)
IB-0300042
(1XB781)
(Optional)
IB-0300043
(1XB782)
(Optional)
IB-0300044
(1XB783)
(Optional)
IB-0300070
(1CT784)
(Optional)