Mitsubishi Q172CPU User Manual page 107

2 SYSTEM CONFIGURATION
Model name
Item
Cable length [m(ft.)]
Servo amplifier to servo amplifier
SSCNET cable
Motion CPU to servo amplifier
SSCNET cable
Motion CPU to Dividing unit
SSCNET cable
Terminal connector
(h) FR-V5NSCBL
FR-V5NSCBL01
FR-V5NSCBL005
0.5(1.64)
(4) Connection example with servo amplifiers
As the SSCNET cables or terminal connector is different depending on the servo
amplifiers, refer to the following connection example.
The SSCNET cables and terminal connector used in the connection example are
any of the models shown in the following table.
When absolute position detection control is executed, installed battery(MR-BAT/
A6BAT) to servo amplifier.
When the vector inverter (FR-V5 0- ) is connected, fix the ferrite core to the
SSCNET cable. (Refer to "SSCNET communication option FR-V5NS operating
manual" for details.)
Part name
FR-V5NSCBL05
1(3.28) 5(16.40)
Model name
MR-HBUS M
MR-J2HBUS M
MR-J2HBUS M-A
FR-V5NSCBL
Q173HB CBL M/
Q172HBCBL M(-B)
Q173J2B CBL M/
Q172J2BCBL M(-B)
Q173DVCBL M
MR-TM
MR-A-TM
2 - 88
FR-V5NSCBL10 FR-V5NSCBL20
10(32.81) 20(65.62)
Depiction in connection example