Mitsubishi Q172CPU User Manual page 81

2 SYSTEM CONFIGURATION
No.
Name
Dip switches
(Note-1)(Note-2)
6)
(Shipped from the
factory in OFF
position)
7) Module fixing hook
(Note-1) : When using the Q173PX-S1 only.
(Note-2) : The function is different according to the operating system software installed.
POINTS
The lighting condition of input display LED is shown below.
(1) PLS.A 1 to 3, PLS.B 1 to 3
• Q173PX is set on the system setting display of SW6RN-GSV P.
• All axes servo ON command (M2042) turned on.
• Manual pulse generator enable flag (M2051, M2052, M2053) turned on.
• Manual pulse generator signal is input.
(2) TREN 1 to 3
• Q173PX is set on the system setting display of SW6RN-GSV P.
• Tracking signal is input.
Detection setting of TREN1 signal
Dip switch 1
SW1 SW2
OFF OFF
ON ON
ON OFF
Dip switch 2
OFF ON
Detection setting of TREN2 signal
Dip switch 3 SW3 SW4
OFF OFF
ON ON
ON OFF
Dip switch 4
OFF ON
Detection setting of TREN3 signal
Dip switch 5 SW5 SW6
OFF OFF
ON ON
ON OFF
Dip switch 6
OFF ON
Hook used to fix to the base unit.
2 - 62
Application
TREN is detected when
TREN signal turns off to on.
TREN is detected when TREN
signal turns on to off.
TREN is detected when
TREN signal turns off to on.
TREN is detected when TREN
signal turns on to off.
TREN is detected when
TREN signal turns off to on.
TREN is detected when TREN
signal turns on to off.