Thermosensor Removal; Thermosensor Inspection; Thermosensor Installation - KYMCO SUPER 9 50 Service Manual

11
. COOLING SYSTEM
THERMOSENSOR

THERMOSENSOR REMOVAL

Remove the seat, met-in box and frame
body cover.
Drain the coolant.
Disconnect the thermosensor wire.
Remove the thermosensor.

THERMOSENSOR INSPECTION

Suspend the thermosensor in a pan of water
over a burner and measure the resistance
through the sensor as the water heats up.
Temperature(℃) 50
Resistance(Ω)

THERMOSENSOR INSTALLATION

Apply 3-BOND No. 1212 sealant or
equivalent to the cylinder head threads and
install it into the thermostat housing.
Connect the thermosensor wire.
Fill the reserve tank with coolant. ( 3-10)
Install the frame body cover, met-in box
and seat. ( 2-3)
＊
Be sure to bleed air from the cooling
system.
80 100 120
154 52 27 16
Thermosensor
Thermosensor Wire
Thermosensor
Thermometer
Thermosensor
SUPER 9 50
11-12