Reed Valve Removal; Reed Valve Inspection; Reed Valve Installation - KYMCO SUPER 9 50 Service Manual

12
. CARBURETOR
REED VALVE
REMOVAL
Remove the rear carrier.
Remove the frame body cover.
Remove the four intake manifold bolts and
gasket.
Remove the reed valve and gasket.
INSPECTION
Check the reed valve for damaged or weak
reeds.
Check the reed valve seat for cracks,
damage or clearance between the seat and
reed.
Replace the valve if necessary.
＊
Do not disassemble or bend the reed
stopper. To do so can cause loss of
engine power and engine damage. If
any of the stopper, reed or valve seat is
faulty, replace them as a unit.
INSTALLATION
Install the reed valve in the reverse order of
removal.
＊
• Install a new gasket with the gasket
indentation aligned with the reed
valve.
• After installation, check for intake air
leaks.
12-11
Intake Manifold
Reeds
Reed Valve Seat
SUPER 9
Bolts
Reed Stopper
50