Auto Bystarter Installation; Float Chamber - KYMCO SUPER 9 50 Service Manual

12
. CARBURETOR

AUTO BYSTARTER INSTALLATION

Install the auto bystarter into the carburetor
body until it bottoms..
Install the set plate and then tighten the two
screws.

FLOAT CHAMBER

Remove the two float chamber screws and
the float chamber.
Remove the screw and O-ring.
Remove the float pin, float and float valve.
12-7
Auto Bystarter
Set Plate
Screws
Float Pin Float
SUPER 9 50
Screws
O-ring