Front Wheel Removal; Front Wheel Inspection; Axle Runout; Wheel Rim - KYMCO SUPER 9 50 Service Manual

13
. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
FRONT WHEEL
REMOVAL
Jack the motorcycle front wheel off the
ground.
Remove the front axle nut to pull out the axle.
Remove the front wheel and the speedometer
gear unit.
INSPECTION

AXLE RUNOUT

Set the axle in V blocks and measure the
runout using a dial gauge.
The actual runout is ½ of the total indicator
reading.
Service Limit: 0.2mm replace if over

WHEEL RIM

Check the wheel rim runout.
Service Limits:
Radial: 2.0mm replace if over
Axial:2.0mm replace if over
13-5
Speedometer Gear Unit
Axle Nut
SUPER 9 50