Throttle Valve Installation - KYMCO SUPER 9 50 Service Manual

12
. CARBURETOR
Remove the jet needle by removing the
needle clip.
Check the jet needle and throttle valve for
wear or damage.
THROTTLE VALVE INSTALLA-
TION
Install the jet needle on the throttle valve
and secure with the needle clip.
Install the rubber seal on the throttle cable
and then install the carburetor cap and
throttle valve spring.
Connect the throttle cable to the throttle
valve.
12-3
Needle Clip
Rubber Seal
Throttle Valve
SUPER 9 50
Throttle Valve
Jet Needle
Spring
Carburetor Cap
Throttle Valve Spring
Throttle Cable