Front Shock Absorber Assembly - KYMCO SUPER 9 50 Service Manual

13
. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
Measure the front shock absorber spring free
length.
Service Limit: 233mm replace if below
ASSEMBLY
Install the damper spring onto the damper rod
and then install them into the front shock
absorber tube.
Install the shock absorber spring onto the
front shock absorber tube.
Set the front shock absorber tube in a vise
and then tighten the lock nut.
＊
When holding the shock absorber tube,
place a shop towel to protect it and do
apply too much force .
Set the front shock absorber in a vise.
Insert the shock absorber tube into the shock
absorber and then install the copper washer
and tighten the damper rod hex bolt.
＊
Apply locking agent to the washer and
hex bolt and install them together.
Add engine oil into the front shock absorber.
Torque: 14.7～29.4N-m
Specified Oil: SS#8
Oil Capacity: 52cc
Hex Bolt
SUPER 9 50
13-16