Steering Handlebar Removal - KYMCO SUPER 9 50 Service Manual

13
. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
STEERING HANDLEBAR
REMOVAL
Remove the handlebar front and rear covers.
( 2-7)
Remove the front and rear brake master
cylinder attaching bolts.
Remove the front upper cover. ( 2-3)
Remove the front lower cover. ( 2-3)
Remove the leg shield. ( 2-4)
Remove the floor board. ( 2-5)
Remove the four screws attaching the right
and left handlebar switches.
Disconnect the throttle cable from the throttle
grip and remove the throttle grip from the
handlebar.
Remove the handlebar lock nut and take out
the bolt.
Remove the handlebar.
13-3
Brake Master Cylinders
Bolts
Screws
Lock Nut
SUPER 9 50
Throttle Grip
Throttle Cable
Bolt