KYMCO SUPER 9 50 Service Manual page 12

1
. GENERAL INFORMATION
After routing, check that the wire
harnesses are not twisted or kinked.
Wire harnesses routed along with
handlebar should not be pulled tight,
have excessive slack or interfere with
adjacent or surrounding parts in all
steering positions.
When a testing device is used, make sure
to understand the operating methods
thoroughly and operate according to the
operating instructions.
Be careful not to drop any parts.
When rust is found on a terminal, remove
the rust with sand paper or equivalent
before connecting.
SUPER 9
Do you understand the
instrument? Is the
instrument set
l ?
Remove Rust !
50
1-10