Thermosensor - KYMCO YUP 250 Manual

12
. COOLING SYSTEM

THERMOSENSOR

THERMOSENSOR REMOVAL
Remove the met-in box and center cover.
Drain the coolant.
Disconnect the thermosensor wire.
Remove the thermosensor.
THERMOSENSOR INSPECTION
Suspend the thermosensor in a pan of water
over a burner and measure the resistance
through the sensor as the water heats up.
Temperature(
50
℃ )
Resistance(W)
154
THERMOSENSOR INSTALLATION
Apply 3-BOND No. 1212 sealant or
equivalent to the thermosensor threads and
install it into the thermostat housing.
Connect the thermosensor wire.
Fill the radiator with coolant. ( 3-9)
Install the center cover ( 2-7) and met-in
box. ( 2-6)
＊
Be sure to bleed air from the cooling
system.
12-15
www.PlanDeGraissage.org
80 100 120
52 27 16
Thermosensor Wire
Thermosensor
Thermometer
Thermosensor Wire
YUP 250
Thermosensor
Thermosensor