11
. COOLING SYSTEM
Inspect the mechanical (water) seal and seal
washer for wear or damage.
*
The mechanical seal and seal washer
must be replace as a set.
WATER PUMP SHAFT REMOVAL
Disconnect the water hose from the right
crankcase cover.
Remove the two timing cap bolts and the
timing cap.
Remove the three bolts attaching the water
pump assembly.
Remove the water pump assembly and
dowel pins.
Remove the water pump shaft from the
water pump assembly.
Mechanical Seal
Bolts
Water Pump Assembly
Water Pump Assembly
Water Pump Shaft
SUPER 9
50
Seal Washer (Porcelain)
Impeller
Bolts
Water Hose
11-8