Thermostat Removal; Thermostat Inspection - KYMCO SUPER 9 50 Service Manual

11
. COOLING SYSTEM
THERMOSTAT

THERMOSTAT REMOVAL

Remove the seat, met-in box and frame
body cover.
Drain the coolant.
Disconnect the water hose from the
thermostat housing.
Remove the two screws and separate the
thermostat housing cover .
Remove the thermostat from the thermostat
housing.

THERMOSTAT INSPECTION

Suspend the thermostat in a pan of water
over a burner and gradually raise the water
temperature to check its operation.
Technical Data
Begins to open
Full-open
Valve lift
＊
• Do not let the thermostat touch the pan
as it will give a false reading.
• Replace the thermostat if the valve
stays open at room temperature.
•Test the thermostat after it is opened for
about 5 minutes and holds the
temperature at 70℃.
11-13
80±2℃
90℃
3.5～4.5mm
Thermostat Housing
Water Hose
Thermostat
Thermostat
SUPER 9 50
Screws
Thermometer