Bottom Cover Removal; Front Inner Fender Removal; Exhaust Muffler Removal - KYMCO SUPER 9 50 Service Manual

2
. EXHAUST MUFFLER/FRAME COVERS

BOTTOM COVER REMOVAL

Remove the four screws attaching the bottom
cover and inner bottom cover.
Remove the bottom cover.

FRONT INNER FENDER REMOVAL

Remove the front upper cover. ( 2-3)
Remove the front lower cover. ( 2-3)
Remove the leg shield and floor board.
Remove the bottom cover.
Remove the screws which combines front
fender and the front axle nut to pull out the
axle.
Remove the front fender and the front wheel
and the speedometer gear unit.
Separate inner fenders.
The installation sequence is the reverse of
removal.

EXHAUST MUFFLER REMOVAL

Remove the two exhaust muffler joint lock
nuts.
Remove the two exhaust muffler lock bolts to
remove the exhaust muffler.
Remove the exhaust muffler joint packing
collar.
The installation sequence is the reverse of
removal.
Torque:
Exhaust muffler joint lock nut: 11.8N-m
Exhaust muffler lock bolt:
Bottom Cover
34.3N-m
Screws
Inner Fender
Lock Bolts
SUPER 9 50
Fender
Screws
Nut
Joint Lock Nut
2-6