Thermosensor - KYMCO BET & WIN 50 Manual

11
. COOLING SYSTEM

THERMOSENSOR

THERMOSENSOR REMOVAL
Remove the seat, met-in box and frame
body cover.
Drain the coolant.
Disconnect the thermosensor wire.
Remove the thermosensor.
THERMOSENSOR INSPECTION
Suspend the thermosensor in a pan of water
over a burner and measure the resistance
through the sensor as the water heats up.
Temperature(¢J) 50
Resistance(Ω)
154
THERMOSENSOR INSTALLATION
Apply 3-BOND No. 1212 sealant or
equivalent to the cylinder head threads and
install it into the thermostat housing.
Connect the thermosensor wire.
Fill the reserve tank with coolant. (  3-10)
Install the frame body cover, met-in box and
seat. (  2-3)
°Ø
Be sure to bleed air from the cooling
system.
11-11
www.PlanDeGraissage.org
80 100 120
52 27 16
Thermosensor
Thermosensor
Wire
Thermosenso
r
Thermomete
r
Thermosenso
r
BET & WIN 50