Entering A New Program "Program" Operating Area - Siemens sinumerik 802d sl Operation And Programming Manual

Part Programming
6.1

Entering a new program "Program" operating area

6.1 Entering a new program "Program" operating area
Operating sequences
You have selected the Program Manager.
Use either <NC directory> softkey or the Customer CF card softkey to select the location
NC
directory where you want to store the new program.
Select the <New file> softkey to obtain a new dialog window into which the new main pro-
New file
gram or subroutine names are entered. The .MPF extension for main programs is entered
automatically. The .SPF extension for subroutines must be entered along with the program
name.
Fig. 6-2
Enter the name for the new program.
Use the <OK> softkey to confirm your input. The new part program file will be created, and
the editor window is opened automatically.
Use <Abort> to cancel the creation of the program; the window will be closed.
6-68
The New program interactive screenform
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0