Siemens sinumerik 802d sl Operation And Programming Manual page 149

Information
S For G25, G26, the channel axis identifier consisting of machine data
20080 AXCONF_CHANAX_NAME_TAB is to be used. These can be other than the geo-
metry axis identifiers in MD 20060: AXCONF_GEOAX_NAME_TAB.
S A working area limitation can only be activated if the reference point for the relevant axes
has been approached.
Programming example
N10 G25 X10 Y-20
N20 G26 X100 Y110
N30 T1 M6
N40 G0 X90 Y100
N50 WALIMON
...
N90 WALIMOF
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
; Values for the lower working area limitation
; Values for the upper working area limitation
; Working area limitation ON
; Work only within the limited area
; Working area limitation OFF
Programming
8.2 Positional data
8-149