Siemens sinumerik 802d sl Operation And Programming Manual page 80

Part Programming
6.4 Data transfer via the RS232 interface
Further softkeys
Use this softkey to load files via the RS232 interface.
Receive
Transfer log
Error
log
This log contains all transmitted files with a status information.
S For files to be output
– the name of the file
– an error acknowledgment
S For files to be input
– the name of the file and the path
– an error acknowledgment
Transmission messages:
OK
ERR EOF
Time Out
User Abort
Error Com
NC / PLC Error
Error Data
Error File Name
6-80
Transmission completed successfully
End-of-text character received, but archive file incomplete
The time monitoring is reporting an interruption of the data transfer
Data transfer aborted by the <Stop> softkey
Error at the COM 1 port
Error message from the NC
Data error
1. Files read in with / without header
or
2. Files transmitted without file names in the punched-tape format
The file name does not correspond to the name convention of the NC.
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0