Programmable Scaling Factor: Scale, Ascale - Siemens sinumerik 802d sl Operation And Programming Manual

Hide thumbs Also See for sinumerik 802d sl:
Table of Contents

Advertisement

Fig. 8-7
Fig. 8-8
Programming example
N10 G17 ...
N20 TRANS X20 Y10
N30 L10
N40 TRANS X30 Y26
N50 AROT RPL=45
N60 L10
N70 TRANS
...
Subroutine call – see Section 8.9 "Subroutine technique "
8.2.7

Programmable scaling factor: SCALE, ASCALE

Functionality
A scaling factor can be programmed for all axes with SCALE, ASCALE. The path is en-
larged or reduced by this factor in the axis specified.
The currently set coordinate system is used as the reference for the scale change.
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
Y
G17
Rotated system
+
RPL=
X
Definition of the positive direction of the angles of rotation
Y
20
W
30
Programming example for programmable offset and rotation
Ξ
Ψ
Λ10
ο
(Ν60)
45
Ψ
Λ10
(Ν30)
Ξ
; X/Y plane
; Programmable offset
; Subroutine call; contains the geometry to be offset
; New offset
; Additive rotation by 45 degrees
; Subroutine call
; Offset and rotation cleared
Programming
8.2
Positional data
X
8-143

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents