Coupled Motion: Trailon, Trailof - Siemens sinumerik 802d sl Operation And Programming Manual

Programming
G4 F...
G4 S...
Programming example
N5 G1 F200
N10 G4 F2.5
N20 Z70
N30 G4
N40 X...
8.3.17

Coupled motion: TRAILON, TRAILOF

Note
This function is only available for SINUMERIK 802D sl pro.
Function
When a defined leading axis is moved, the trailing axes (= following axes) assigned to it tra-
verse through the distances described by the leading axis, allowing for a coupling factor.
Together, the leading axis and following axis represent coupled axes.
Fig. 8-31
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
; Dwell time in seconds
; Dwell time in spindle revolutions
; Feedrate F,
; Dwell time 2.5 s
; and 100 %, speed override: t=0.1 min
; Feed continues to be active
C
C2
Y
X
Coupled axes (leading axis C, following axis C2)
Programming
8.3 Axis movements
8-169