8.3.18
Activating, deactivatingprotection zones: CPROT
Function
Activating and preactivating previously defined protection zones for collision monitoring and
deactivating protection zones.
The maximum number of protection zones, which can be active simultaneously on the same
channel, is defined in machine data.
If no toolrelated protection zone is active, the tool path is checked against the workpiece-re-
lated protection zones.
Note
If no workpiece-oriented protection zone is active, protection-zone monitoring does not take
place.
Programming
CPROT (n, state, xMov, yMov)
Parameters
CPROT
n
state
xMove, yMove
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
Call of channel-specific protection zones
Number of protection zone
Status specification
0 = Deactivate protection zone
1 = Preactivate protection zone
2 = Activate protection zone
3 = Preactivate protection zone with conditional stop
Moving the protection zone already defined along the geometry axes
Programming
8.3
Axis movements
8-171