Siemens sinumerik 802d sl Operation And Programming Manual page 37

Table 3-2
Parameters
DP25
DPC1
DPC2
DPC3
DPC4
DPC5
DPC6
DPC7
DPC8
DPC9
DPC10
Important
The meanings of the DP2, DP6, DP12 and DP24 parameters is defined in conjunction with
part program simulation as follows:
S
DP2
S
DP6
S
DP12
S
DP24
and cannot be overwritten.
Interrelation between geometry data and cutting edge parameters
The geometry data required for the simulation of punching/nibbling tools can be mapped to
the cutting edge parameters as follows:
Table 3-3
Round,
hexagon or octagon,
triangle,
double "D",
single "D",
long "D",
rectangle,
square,
elongated hole
Rectangle, square
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
Parameter list for nibbling, continued
Field
Sheet thickness
Axis of the driven tool
Location
Maximum sheet thickness
No. of the multi-tool
DPC5
DPC6
DPC7
DPC8
DPC9
DPC10
Reserved for part program simulation
Tool geometry
Angle of tool orientation
Envelope diameter
Interrelation 'geometry data – cutting edge parameters'
Geometry
Envelope diameter
Orientation angle
Y Length of the tool edge
X Length of the tool edge
3.1
Description
Current sheet thickness
Tool orientation can be changed by way of rotary axis
Tool location
Maximum sheet thickness
Number of the toolholder
Free
Free
Free
Free
Free
Free
Tool geometry
DP24
DP12
DP8
DP9
Setup
Punching and nibbling tools
Cutting edge parameters
3-37