Siemens sinumerik 802d sl Operation And Programming Manual page 104

System
Table 7-4
Parameter
Parity
Data bits
Overwriting
with con-
firmation
7-104
Interface parameters, continued
Description
Parity bits are used for error detection. These are added to the coded character to
convert the number of digits set to "1" into an odd or even number.
Input:
No parity (default setting)
Even parity
Odd parity
Number of data bits with asynchronous transfer.
Input:
7 data bits
8 data bits (default)
Y: When reading in, it is checked whether the file already exists in the NC.
N: The files are overwritten without confirmation warning.
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0