Stopping / Canceling A Part Program - Siemens sinumerik 802d sl Operation And Programming Manual

AUTOMATIC Mode
5.3

Stopping / canceling a part program

Fig. 5-7
A toggle field is provided to define from which position you will search for the term.
Search result
The required block is displayed in the "Current block" window.
5.3 Stopping / canceling a part program
Operating sequence
Press <NC STOP> to cancel a part program.
Press <NC START> to continue the program execution.
Use <RESET> to interrupt the program currently running.
Pressing <NC START> again will restart the program you have interrupted and execute the
program from the beginning.
5-62
Entering the searched term
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0