Siemens sinumerik 802d sl Operation And Programming Manual page 56

AUTOMATIC Mode
Fig. 5-2
Parameters
Table 5-1
Parameter
MCS
+ X
– Y
Position
Distance-
to-go
G function
Feed F
mm/min
Current block
Softkeys
The program control softkeys are displayed (e.g. "Skip block", "Program test").
Program
control
5-56
The AUTOMATIC menu tree
Description of the parameters in the working window
Displays the existing axes in the MCS or WCS
X
Y
If you traverse an axis in the positive (+) or negative () direction, a plus or minus sign will appear in
the relevant field.
If the axis is already in the required position, no sign is displayed.
These fields display the current position of the axes in the MCS or WCS.
mm
These fields display the current position of the axes in the MCS or WCS.
Displays important G functions
Displays the path feedrate actual value and setpoint
Tool Displays the currently active tool with the current edge number (T..., D...).
The block display displays seven subsequent blocks of the currently active part program. The dis-
play of one block is limited to the width of the window. If several blocks are executed quickly one
after the other, it is recommended to switch to the "Program progress" window. To switch back to the
seven-block display, use the "Program sequence" softkey.
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
Block
Program
search
control
Program To
test contour
Dry run
To
feedrate
end point
Without
Conditional
calcul.
stop
Interr.
Skip
Single block
Find
fine
RTO (rap. trav.
overr.) eff.
Previous<<
Previous<<
Explanation
Program
correction
6FC5 398-3CP10-0BA0