Data Transfer Via The Rs232 Interface - Siemens sinumerik 802d sl Operation And Programming Manual

6.4

Data transfer via the RS232 interface

Functionality
The RS232 interface of the control system can be used to output data (e.g. part programs)
to an external data backup device or to read in data from there. The RS232 interface and
your data backup device must be matched with each other.
Operating sequence
You have selected the Program Manager operating area and you are in the overview of the
NC programs already created.
Select the data to be transmitted using either the cursor or the <Select all> softkey.
Thereafter, copy the data to the clipboard.
Copy
Select the <RS232> softkey and select the desired transfer mode.
RS232
Fig. 6-17
Use <Send> to start the data transfer. All data copied to the clipboard will be transmitted.
Send
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
Reading out a program
6.4 Data transfer via the RS232 interface
Part Programming
6-79