How To Use Printer; Lcd And Operating Buttons - Cubicon Single Operation Manual

6. How to use printer

The printer can be stopped immediately if there is a problem while the printer is in operation.
Emergency
Press the [BACK] and [ENTER] buttons simultaneously
Stop
the printer and reboot it (soft reboot)

6.1. LCD and Operating Buttons

[1] LCD
[2] ENTER button
[3] Status lighting
[4] BACK button
[5] HOME button
Copyright Reserved HyVISION System Inc.
This document is a general purpose operation manual and is subject to change without notice when necessary
for product improvements. HyVISION System does not take the responsibility for loss caused by any error in the
document or provisions and use of this document.
1
BACK
HOME
Shows the current status or menu of the printer
- Launch the function menu
- Rotate Right/Left: Navigate among menus or change a menu item
- Pressing: Select a menu or setting
Display printer statuses in different LED colors
Status Being heated
Color Red
* If you operate a function, LED will be flickering and it will require users to
check if there are subsequent actions that need to be performed.
Move to the previous menu item
Move to the status display
Cubicon Single Operation Manual
2
ENTER
3
4
5
Printing
In printing
Completed
Blue Green
(150616,En)
to instantly stop
Standby
White
17 / 44