Printer Power On - Cubicon Single Plus User Manual

* Make sure that the filament does not come loose in the process of taking out remaining filament spool. And
fix the remaining filament to the spool. Make sure that remaining filament does not come loose in storage
process.
* Keep remaining filament in use in a plastic bag to prevent it from outside exposure such as humidity and
dust. Make sure to use filament as soon as you open it.
a while, the printing quality may get worse, it stops extruding from the extruder.

5-4. Printer power ON

Make sure to recheck inside packing material removal, any part damage, the spool installation
condition/rotation direction/rotation condition etc. in prior to turn on the printer power.
Do not neglect the printer by turning off the printer power in heat condition of the extruder. The printer
malfunction may be caused due to electronic part damage by abnormal cooling fan operation.
① Change power switch (O) of the printer body to
【OFF】
③ Change the power switch (｜) of the printer body to
【ON】
If the filament is exposed to external enviroment for
② Put a power cable to a socket.
④ Check the indication of LCD screen.
15
CUBICON Single Plus User Manual