Cubicon Single Operation Manual page 7

Clean Filter to Ensure User Health
The filament material used by the FFF type printer is known to be harmless to the human body.
However, dusts and impurities can be generated when it is melted by heat.
Cubicon Single uses a deodorizing filter, HEPA filter and Purafil catalyst to improve the filter
performance.
> HEPA filter: 13H grade to collect 99.97% of0.3um particulate matter.
> Deodorizing filter: Filtering of harmful gas.
> Purafil catalyst: Filtering of organic compounds generated by copiers and printers.
Source Gases Removed
Hydrocarbons
Automobile Exhaust
Hydrogen sulfide
Gas
Nitric oxides
Effluent from Living Organic acids
Body Oxides of sulfur
Cleaning Product Ammonia
Ozone
Copier/Printer
Volatile Organic Compounds
Acrolein
Discharge Gas from
Hydrocarbons
Industrial Complex
Hydrogen sulfide
Aldehydes
Office Furniture
Formaldehyde
[Comparison of Filtering of Activated Carbon and Purafil Catalyst]
Copyright Reserved HyVISION System Inc.
This document is a general purpose operation manual and is subject to change without notice when necessary
for product improvements. HyVISION System does not take the responsibility for loss caused by any error in the
document or provisions and use of this document.
Cubicon Single Operation Manual
Activated
Purafil
carbon
O
O O
O
O
O
O
O
O
O
O
O
O
O
O
O
(150616,En)
7 / 44