Cubicon Single Operation Manual page 6

Auto Leveling Plus Function
The flatness and distance from the nozzle of the heating bed, which is the platform on which the
printed object is constructed, are important factors determining the quality of the printed object. The
conventional FFF printer not fully auto levels, as the user must manually or semi-manually adjust the
bed height, or even when it claims to be auto level, it was not fully auto level since the deviation is
calculated with the software and reflected in printing.
Cubicon Single features the unique Auto Leveling Plus function, which precisely measures the height
of the heating bed and uses it to adjust the space from the nozzle in optimal condition. Moreover, it
applies a special coating on the heating bed to eliminate the inconvenience of having to use the Kapton
tape, and thus ensures an optimum print quality and minimum maintenance.
Experience Cubicon Single's unique Auto Leveling Plus function.
Convection Circulation Function
Cubicon Single applies the convection circulation function internally.
This function maintains a constant internal temperature and uses the filter to filter out the pollutants that
are generated during printing. It helps create a more comfortable and uniform printing environment.
Copyright Reserved HyVISION System Inc.
This document is a general purpose operation manual and is subject to change without notice when necessary
for product improvements. HyVISION System does not take the responsibility for loss caused by any error in the
document or provisions and use of this document.
Cubicon Single Operation Manual
(150616,En)
6 / 44