Cubicon Single Operation Manual page 8

Ergonomic and Stylish Design / Easy Operation
Cubicon Single was designed with conventional printers as the inspiration, making it a good match for
an office environment.
Moreover, it places a dial button (rotation and pushing) and push button with LED lights on the indicator
panel so that users can intuitively understand the operation without expert knowledge. In addition, the
menu is arranged around the most frequently used functions, so that the users can easily familiarize
themselves with the printer regardless of their level of previous experience with 3D printers.
Filament Detection Function
Cubicon Single has a built-in function to monitor the filament feed status so that the user can pause
printing to check the filament feed when the filament is not supplied to the extruder after the filament is
used up or cut off during printing. Printing can then be resumed after the problem is resolved.
Using this function, the user can continue printing after replacing the filament without having to start
again, even when the filament runs out in the middle of a print job.
Copyright Reserved HyVISION System Inc.
This document is a general purpose operation manual and is subject to change without notice when necessary
for product improvements. HyVISION System does not take the responsibility for loss caused by any error in the
document or provisions and use of this document.
Cubicon Single Operation Manual
(150616,En)
8 / 44