Table of Contents
Advertisement
Bluetooth
Glossary of terms
Below are some terms used in this user's manual to help you become familiar
with using your Bluetooth devices and your new AT&T telephone system.
Active devices - the Device list has two active slots for two cell phones, or
one cell phone and one headset. When a device in the list is active, it will
have a D1: or D2: in front of the device name. In order to use a Bluetooth
device on a call, it must be in an active slot and be connected.
Bluetooth cell phone - refers to a mobile Bluetooth enabled cellular telephone.
CELL line - the telephone line associated with your cell phone service.
On your CLP99286/CLP99386/CLP99456/CLP99486/CLP99546/
CLP99556/CLP99586, press CELL 1
or CELL 2
on the handset, or
press CELL 1 or CELL 2 on telephone base to use the cell line.
telephone base to use the cell line.
Connected - when you pair a Bluetooth device to the CLP99286/CLP99386/
CLP99456/CLP99486/CLP99546/CLP99556/CLP99586, it is placed in
an active slot and automatically connected. When a device is connected, a 1
and/or 2 will display after
on the handset and telephone base screen. Also,
the CELL 1 and/or CELL 2/HEADSET
light on the telephone base will be on.
If a device loses its connection to the telephone base, it must be reconnected
before you can use the device with the telephone system.
Device list - The list of devices that have been paired to the telephone. You
can pair up to 4 Bluetooth enabled devices (cell phones or headsets).
Disconnected - when a device is disconnected, 1 and/or 2 displays
/
/
on the handset and telephone base screen. The CELL 1 and/or
after
CELL 2/HEADSET
light on the telephone base is/are off.
Discoverable mode - before a Bluetooth enabled device can be paired, it
must be set to this mode. When pairing your cell phone, the telephone base
is set to this mode. Depending on the cell phone manufacturer, this mode is
sometimes referred to as Find Me or Visibility.
Paired devices - The Bluetooth enabled devices (cell phones or headsets)
that have shared registration information with the telephone base. A total
of four Bluetooth enabled devices can be paired to the telephone base.
However, only two paired devices can communicate with the base at a time.
Pairing - sometimes referred to as bonding. The process of sharing
registration information between two Bluetooth enabled devices. Your
Bluetooth enabled cell phone or headset must first be paired to the
telephone base in order to use it with this telephone system.
PIN - by default, the PIN is 0000 for the telephone base and for most Bluetooth
devices. PIN information may be exchanged between Bluetooth devices before
they can be used. This is also known as a Passkey or Passcode.
20
Advertisement
Table of Contents
