Installation Options; Tabletop To Wall-Mount Installation - AT&T CLP99283 User Manual

Getting started

Installation options

Your telephone base is ready for tabletop use. If you want to mount your
telephone on a wall, follow the steps mentioned below, to connect the
telephone base with a standard dual-stud telephone wall-mounting plate. You
may need a professional to install the mounting plate.

Tabletop to wall-mount installation

1. Unplug the power adapter from the power outlet. Unplug the telephone
line cord from the wall jack (or DSL filter).
2. Press down on the tabs on the wall-mount bracket on the telephone base
to release it from tabletop orientation.
3. Swivel the wall-mount bracket down to wall-mount position and then push
it into the telephone base until it clicks into place.
4. Plug the telephone line cord (or DSL filter) into the wall jack. Plug the
power adapter into a power outlet not controlled by a wall switch.
Align the holes on the back of the telephone base with the wall-
mounting plate.
5. Slide the telephone base down until it locks securely. Bundle the
telephone line cord and power adapter cord neatly with twist ties,
if necessary.
1
4
2
14
3
5